Front Panel Of An Acx1100 Router - Juniper ACX1000 Hardware Manual

• Eight Gigabit Ethernet RJ-45 ports labeled 0/1/0 through 0/1/7
• Combination Gigabit Ethernet ports labeled 0/2/0 through 0/2/3, either:
• Four Gigabit Ethernet RJ-45 ports labeled Cu
• Four Gigabit Ethernet ports labeled SFP that accept SFP transceivers
Figure 11: Front Panel of the ACX1000 Router
1 DC terminals
—
2 Management Ethernet port
—
Console or auxiliary port
3
—
4 Alarm contact port
—
5 T1/E1 ports
—
6 Gigabit Ethernet (GE) ports
—
SEE ALSO
LEDs on ACX1000 and ACX1100 Routers | 55

Front Panel of an ACX1100 Router

The front panel of an ACX1100 router consists of the following components (see
and Figure 13 on page 51):
• Chassis status LED labeled SYS
7 ESD point
—
8 Combination Gigabit Ethernet RJ-45 and SFP
—
ports
External clocking ports
9
—
10 System (SYS) LED
—
11 USB port
—
12 Grounding terminals
—
Figure 12 on page 50
49