Juniper ACX1000 Hardware Manual page 11

The ACX Series router is powered by Junos OS, supporting extensive L2 and L3 features, IP and MPLS
with traffic engineering, rich network management, fault management, service monitoring and
Operation, Administration, and Maintenance (OAM) capabilities, and an open software development kit
(SDK) system that allows providers to customize and integrate operations with their own management
systems. For a list of related Junos OS documentation, see
software/junos/.
As part of the mobile backhaul, the ACX Series router at the cell site and the MX Series router at the
aggregation layer provide comprehensive end-to-end Ethernet, MPLS, and OAM features with the one
Junos OS running on both platforms.
The compact routers are one rack unit (U; that is, 1.75 in., or 4.45 cm) tall. Several routers can be
stacked in a single floor-to-ceiling rack for increased port density per unit of floor space.
The chassis is a rigid sheet metal structure that houses all the other router components. The chassis
measures 1.75 in. (4.45 cm) high, 9.4 in. (24 cm) deep, and 17.5 in. (44.5 cm) wide. The outer edges of
the mounting brackets extend the width to 19 in. (48 cm) (from the front-mounting brackets to the rear
of the chassis). The chassis installs in standard 300-mm deep (or larger) enclosed cabinets, 19-in.
equipment racks, or telco open-frame racks.
Benefits of the ACX1000 and ACX1100 Routers
• Space efficiency—Conforming to the ETSI 300 specifications, the ACX1000 routers are easy to
deploy in environments where rack space and cooling are limited.
• Improved operational efficiency with zero-touch deployment (ZTD)—The ACX Series routers
support a zero-touch deployment (ZTD) model that significantly reduces the time for any new
equipment installation and provisioning, resulting in improved operational efficiency.
• Installation flexibility with an environmentally hardened design—Most ACX Series routers are
temperature hardened and support passive cooling for outdoor deployments in extreme weather
conditions.
ACX1000 Router Description
The ACX1000 routers contain eight T1/E1 ports and twelve Gigabit Ethernet ports, eight of which are
RJ-45 ports. The ports labeled COMBO PORTS provide an additional four RJ-45 ports or four Gigabit
Ethernet SFP ports. You can use only one set of combination ports at a time.
https:/ /www.juniper.net/documentation/
3