Board Options - Toshiba TOSVERT VF-P7 Instruction Manual

9. 6 Board options

Besides the optional add-on cassettes, such the board options as shown below are prepared for
the inverter VF-P7.
■Table of board options
Option name
PG feedback
board
■Functions of board options
Model
Vector control with sensor
Position control command operation
PG system
Maximum frequency of input pulse
Length of PG wiring
Power supply for PG
Voltage drop compensation
for PG power supply
Sensor disconnection
detection/in running (in rotation)
Sensor disconnection
detection/in suspension
±10 V analog command input
Multifunction programmable output 2 circuits (sink/source switchable)
Alarm output
Terminal board
PG wiring
Connection with other add-
on cassette option
Remarks
(applied motor, expected)
■Installation of board option
For installing a board option, fit the bracket to the right side of the inverter and plug the
connector of the option board into the connector jack of the control board.
Function, purpose
Since this option is compatible to
vector option unit, it can be used
for speed control and torque
control by the PG feedback
function.
Vector option unit
(optional add-on cassette)
VEC001Z
Speed controlled operation
(150 % torque at zero speed, speed control range: 1:1000 [1000 ppr PG],
speed accuracy: ±0.02 % [50 Hz, basic digital input])
Torque controlled operation
(torque control accuracy: ±10 % [torque control range: -100 to +100 %])
Available(pulse command)
Line driver system
(equivalent to 26LS31)
Complementary system
Open collector system
60 kHz(2-phase), 120 kHz(single phase)
Maximum frequency is restricted depending on kind of encoder and wiring distance.
Pulse duty: 50±10 %
100 m (complementary system)
5 V, 6 V, 12 V, 15 V
(switchable), 160 mAdc
Available
Available
Available
(line driver system only)
Available
4 circuits (sink/source switchable)
Detachable terminal board
(Phoenix)
+ connector for VFV3 sensor
Connector wiring
(connector for VFV3 sensor)
Available
VFV3 motor/standard
motor with sensor
Board option
I-12
Model
VEC002Z
(For complementary / open
collector type encoder)
VEC003Z
(For line driver type encoder)
PG feedback board
(board option)
VEC002Z
Unavailable
Complementary system
Open collector system
100 m (complementary system)
12 V (fixed), 160 mAdc
Unavailable
Available
Unavailable
Unavailable
Unavailable
Unavailable
Fixed terminal board (Phoenix)
(equivalent to VFS7E control
terminal board)
Screw terminal
Unavailable
Standard motor with sensor
Connector
Remarks
Cannot be
used together
with any
optional add-on
cassettes.
VEC003Z
Unavailable
Line driver system
(equivalent to 26LS31)
30 m
5 V (fixed), 160 mAdc
Unavailable
Available
Unavailable
Unavailable
Unavailable
Unavailable
Fixed terminal board (Phoenix)
(equivalent to VFS7E control
terminal board)
Screw terminal
Unavailable
VFV3 motor
Bracket