Specification; Specifications By Types; Standard Specifications By Types - Toshiba TOSVERT VF-P7 Instruction Manual

11. Specifications by types

11. 1 Standard specifications by types

1) Standard specifications by types
Item
Voltage class
Applicable motor [kW]
Model No.
Type
Output capacity [kVA] (*1)
Output current [A]
Output voltage
Rated overload current
Dynamic braking circuit
Dynamic braking
resistor
Main
Voltage, circuit
frequency Control
circuit(*2)
Allowable fluctuation
Protection structure
Cooling system
Coating color
EMI filter
Item
Voltage class
Applicable motor [kW]
Model No.
Type
Output capacity [kVA] (*1)
Output current [A]
Output voltage
Rated overload current
Dynamic braking circuit
Dynamic braking
resistor
Main
circuit
Voltage,
frequency Control
circuit(*2)
Allowable fluctuation
Protection structure
Cooling system
Coating color
EMI filter
(*1): Rated output capacity indicates a value based on the condition that output voltage is 220 V in case of the 200 V class or
440 V in case of the 400 V class.
(*2): The models of 22 kW or lower has no control power supply terminals(R0, S0). Optional control power supply is available
for those types.
(*3): There are three openings for wiring; namely, wiring holes for main circuit input, for main circuit output and for control
circuit. After wiring is complete, close the openings properly.
(*4): The models of 30 kW or higher have neither cover for the wiring hole that has a big aperture nor space for bending
external cables inside the unit. When a protector is installed externally, use an optional cover for the wiring hole.
(*5): Allowable voltage variation is +/-10 % in continuously operation (100 % load).
(*6): 120 % for 1 minutes, 150 % for 0.3 second
18.5 22
2185P 2220P
28 34
73 88
3-phase 200 to 230 V (Maximum output voltage corresponds to input supply voltage.)
120% for 1 minutes, 180% for 0.5 second
Built-in dynamic braking
drive circuit
External braking resistor/ braking unit is optionally available.
Option
Voltage: +10% / -15% (*5), Frequency: +/-5%
Enclosed type (JEM1030)
IP20 (*3)
18.5 22 30
4185P 4220P 4300P
28 34 46
37 44 60
3-phase 380 to 400 V (Maximum output voltage corresponds to input supply voltage.)
120 % for 1 minutes, 180 % for 0.5 second
Built-in dynamic
braking drive circuit
External braking resistor/ braking unit is optionally available.
3-phase 380-460 V,
50/60 Hz
Option
Voltage: +10%/-15% (*5), Frequency: +/-5%
Enclosed type
(JEM1030) IP20 (*3)
K-1
Description
200 V class
30 37
VFP7–
2300P 2370P
46 55
120 144
Rating: Refer to 6.13.4.
3-phase 200-220 V, 50 Hz
3-phase 200-230 V, 60 Hz
Single phase 200-220 V, 50 Hz
Single phase 200-230 V, 60 Hz
Open type (JEM1030) IP00 (*4)
Forced-air cooling
Munsell 5Y-8/0.5
Option to be installed externally
Description
400 V class
37 45
VFP7–
4370P 4450P
55 69
72 90
Optional
Rating: Refer to 6.13.4.
3-phase 380-440 V, 50 Hz
3-phase 380-460 V, 60 Hz
Single phase 380-440 V, 50 Hz
Single phase 380-460 V, 60 Hz
Open type (JEM1030) IP00 (*4)
Forced-air cooling
Munsell 5Y-8/0.5
Option to be installed externally
45 55
2450P 2550P
69 84
180 220
Optional
55 75
4550P 4750P 4900P
84 110
110 144
90
143
180
(*6)