Step 1: Setting the rating of the motor
Check the motor for use. (pole number, rating capacity, type)
Number of motor poles:
Adjustment range/,,,,,,,
Rated capacity of motor:
Adjustment range/∼ [kW]
: Toshiba standard motor #1
: Toshiba VF motor
: Toshiba V3 motor
: Toshiba standard motor #2
Pole number:
4P motor
Set (Rated capacity)
Setting/ ∼ [kW]
Set (Motor type)
Setting/∼
Set (Auto-tuning)
Setting/
End of tuning
<Caution>
In case "" (Tuning error) is
displayed at the time of power
injection, set at .
Motor type:
Other than 4P motor
Is motor
capacity same with
Inverter capacity?
No
Set (Rated capacity)
Setting/ ∼ [kW]
Set (Motor type)
Setting/
Set (Auto-tuning)
Setting/
Set (Auto-tuning)
Setting/
Set (Number of motor poles)
Setting/,,,,,,,
Give a Run command
→Panel displays "
→Run (at least 30Hz)
No trip
End of auto-tuning
F-36
Motor type:
Adjustment range/
: Toshiba standard motor
#1
: Toshiba VF motor
: Toshiba V3 motor
: Toshiba standard motor
#2
: Other motors
Yes
Set (Motor type)
Setting/
Tuning error ()
appeared
"
In case desirable
property doesn't
appear.
Manual tuning
Set motor constant
parameters manually.
⇒Refer to Step 2 in the
next page