Toshiba TOSVERT VF-P7 Instruction Manual page 137

■Parameter setting
Title
Selection of power running

torque limit #1
Power running torque limit #1

Selection of regenerative

torque limit #1
Regenerative torque limit #1

With these parameters, you can set 4 patterns of positive torque limits and 4 patterns of
negative torque limits. Refer to 7.2 for the setting for switching from the terminal board.
Power running torque limit #1− Regenerative torque limit #1−
Power running torque limit #2− Regenerative torque limit #2−
Power running torque limit #3− Regenerative torque limit #3−
Power running torque limit #4− Regenerative torque limit #4−
Note) If the value set with  (stall prevention level) is smaller than the torque limit, then the value set
with  acts as the torque limit.
b) Limiting the torque with external signals
Regenerative
Reverse
Power running
The torque limits can be changed arbitrarily by means of external signals.
[External signals]
Voltage signals
Current signals
Function
: VI(voltage) / II(current)
: RR(volume / voltage)
: RX(voltage)
: RX2(voltage)(optional)
: 
  ∼  [%],   : Invalid
: VI(voltage) / II(current)
: RR(volume / voltage)
: RX(voltage)
: RX2(voltage)(optional)
: 
  ∼  [%],   : Invalid
Power running
Regenerative
RR-CC ――0∼10V
RX-CC ――0∼±10V
VI-CC
――0∼10V
II-CC
――4(0)∼20mA
F-45
Adjustment range
＋250% torque
Forward
− 250% torque
, 




Default setting



