Toshiba TOSVERT VF-P7 Instruction Manual page 199

②Expansion TB option unit
Contact
input
Multifunction programmable analog output
(current/voltage output switchable)
Multifunction programmable relay contact
output
■Installation of optional add-on cassettes to 160 kW or less model (400V class)
To install optional add-on cassette(s), use the attachment and set the options on the right side
of the inverter. To attach the option(s), secure an enough space in the right side of the inverter.
・To install a cassette:
・To install two cassettes:
・To install three cassettes:
・No matter for cassettes number, L1 = 20.0 mm or more
Optional add-
on cassettes
■Installation of optional add-on cassettes to 200 kW or more model (400V class)
To install optional add-on cassette(s), use the attachment and set the options on the right side
of the control panel. To attach the option(s), secure an enough space (L: 50 mm or more) in front
of the inverter.
L
Function
16-bit binary input
(12-bit binary)
4-digit BCD code input (3-digit
BCD code)
Multifunction programmable
input (high-order 8 bits)
L1
Flexible connecting
board＊
Option cover＊
: In a set with SBP002Z.
＊
･ Sink input
ON : 5 V DC or less (5 mA type)
OFF : 11 V DC or more, or 0.5 mA or less
･ Source input
ON : 11 V DC, 2.5 mA or more (maximum 30 V DC)
OFF : 5 V DC or less, or 1.4 mA or less
･ Current: 4 to 20 mA DC output (source output)
Maximum connectable resistance: 750 Ω
･ Voltage: ±10 V DC output
･ 1a, 1b contact output (double circuit)
Contact rating : 250 V AC, 2 A (cos φ = 1)
250 V AC, 1 A (cos φ = 0.4)
30 V DC, 1 A
75 kW or less model (200V class)
L = 48.5 mm or more
L = 73.5 mm or more
L = 98.5 mm or more
Flexible connecting
Attachment＊ アタッチメント＊
: In a set with SBP001Z.
＊
90 kW or more model (200V class)
I-11
Description
board＊ Optional add-
on cassettes
Option cover＊
Optional add-
on cassettes
L