Replace On/Off Switch - Nespresso Momento 100 Service Manual

Replace ON/OFF switch
B07/A06
Prerequisites
• Water tank door is removed → p. 50.
• Coffee module(s) are removed → p. 55.
• Water tank slot is removed → p. 58.
Procedure
1. Remove the EMC PCB lid (B08/A07) → Fig. 27 on p. 56.
2. Unplug the 4 left-hand receptacles on the EMC PCB (B07/A06) coming from the
ON/OFF switch (B76/A73).
• The Momento 100 chassis is wired differently:
A06
• Unplug the 2 left-hand receptacles on the EMC PCB (A06) coming from
the ON/OFF switch (A73).
• Continue with the M100-Block on the next page.
Version 0.1 EN
Repair > Chassis repairs > Replace ON/OFF switch
Fig. 37
Momento Service manual
Fig. 36
63