Table of Contents
Advertisement
FOR UK AND REPUBLIC OF IRELAND ONLY
WARNING: Always replace the fuse cover of the fitted plug, never use the plug with the fuse cover omitted. If a replacement fuse cover is
required, ensure it is the same as the one visible on the pin face of the plug (i.e. RED or ORANGE).
Fuse covers are available from:
Use a 13 A fuse approved by ASTA to BS1362, marked thus
e
WARNING: a plug with a bared flexible cord is hazardous if engaged in a live socket. If the fitted plug has been cut from the power
supply cord, it should be destroyed and replaced with a three pin plug in accordance with
by
the following code:
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter "N" or coloured BLUE or
BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter "L" or coloured BROWN
or RED which is connected to the fuse.
The wire which is coloured GREEN/YELLOW should be connected to the terminal marked with the letter "E", or by the earth symbol or
coloured GREEN or GREEN/YELLOW.
e
uld
earth symbol
e.
.
.
al
Switch ON
To change the settings, press Espresso button:
1x blinking: Power save mode after 30 min (initial setting)
2x blinking: Power save mode after 60 min
3x blinking: Power save mode OFF
BBS Ltd
Po Box 110
Farnham Surrey GU104XL
Phone: 01252 727755
BLUE: neutral
BROWN: live
GREEN/YELLOW: earth
Power save mode settings
Press Espresso button for 3 s while heating up.
3 s
In power save mode, buttons fade in/out every 5 s. To
reactivate, press any button. Press again to preselect coffee.
Espresso button blinks to indicate setting
mode.
Advertisement
Table of Contents
