Machine head
3.10.3 Disassembling the switching cylinder
FIg. 48: Disassembling the switching cylinder
(1) - Motor fastening screws
(2) - Pneumatic hose
(3) - Pneumatic connection
To remove the switching cylinder:
1. Pull off the pneumatic hose (2).
2. Unscrew the connection (3) from the cylinder if necessary.
3. Remove the drive motor ( p. 57).
4. Loosen the clamping screw (5) between switching cylinder and
5. Pull the switching cylinder up and out.
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before disassembling the
switching cylinder.
①
drive rod.
②
③
④
(4) - Eccentric
(5) - Clamping screw
⑤
59