Assembling The Drive Motor - DURKOPP ADLER 745-35-10 F Service Instructions Manual

Hide thumbs Also See for 745-35-10 F:

Table of Contents

3.10.2 Assembling the drive motor

FIg. 47: Assembling the drive motor

(1) - Eccentric

(2) - Motor fastening screws

(3) - Drive motor

To assemble the drive motor:

1. Slide the drive motor (3) with its shaft into the eccentric (1) towards the

2. Align the drive motor (3) parallel to the upper shaft and centrally to the

3. Tighten the drive motor (3) with the motor fastening screws (2).

4. Tighten the screws on the eccentric (1).

5. Carefully fit the cover.

6. Tighten the screw (5) of the cover.

7. Establish the electrical connection on the motor.

Risk of injury from moving parts!

Crushing possible.

Switch off the machine before assembling the drive

middle knife guide.

To do so, the plug between cable harness and motor cable.

Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017

Machine head