DURKOPP ADLER 745-35-10 F Service Instructions Manual page 103

Corner knife
Proper setting
The corner knife cuts must be symmetrical to the seams.
To align the corner knife station with the seams:
1. Iron a piece of Vlieseline onto the workpiece.
 This makes the corner knife cuts more visible.
2. Sew a test seam.
3. Check seam and cutting pattern.
Correction of the corner incision at the seam end
Fig. 87: Aligning the corner knife station with the seams (2)
(1) - Switch
(2) - Screw
To correct the corner incision at the seam end:
1. Swing the corner knife station (4) out completely.
2. Loosen the screws (1).
3. Shift the holder (3).
4. Tighten the screws (1).
5. Swivel the corner knife station (4) back.
6. Correct the distance of the switch (2).
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
① ② ③ ④
(3) - Holder
(4) - Corner knife station
101