Setting The Rear Toothed Belt Tension; Setting The Initial Position Of The Swivel Arms (745-35-10 B) - DURKOPP ADLER 745-35-10 F Service Instructions Manual

13.2.2 Setting the rear toothed belt tension

Fig. 132: Setting the rear toothed belt tension
(1) - Tensioning roller
To set the rear toothed belt tension:
1. Loosen the screw (2).
2. Turn the tensioning roller (1).
3. Tighten the screw (2).

13.3 Setting the initial position of the swivel arms (745-35-10 B)

Fig. 133: Setting the initial position of the swivel arms (1)
(1) - Arm
(2) - Swivel arm
(3) - Swivel arm
150
①
① ② ③
(2) - Screw
④ ⑤
(4) - Arm
(5) - Shank
(6) - Shank
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Feeding device
②
5.0 mm
⑥
0.5 - 2.0 mm