Table of Contents
Advertisement
Information
You can cancel the USB data transfer with a press on the
The following notice will appear if the selected data has already been
stored on the USB key: Already existing on USB: XY. Write? YES/NO.
The write process can take between a few seconds and several minutes
depending on which write option has been selected.
When the data has been written to the USB key, the display shows
Fig. 302: Data transfer to USB (2)
3. Press OK.
The display returns to USB data transfer.
340
• Press YES: Data on the USB key is overwritten.
• Press NO: The display returns to USB data transfer.
the message Data successfully written: XY.
Serviceanleitung 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Programming
button.
Advertisement
Table of Contents
