DURKOPP ADLER 745-35-10 F Service Instructions Manual page 104

Correction of the corner incision at the seam beginning
Fig. 88: Aligning the corner knife station with the seams (3)
(5) - Screw
To correct the corner incision at the seam beginning:
1. Loosen the screw (5).
2. Adjust the corner knife station with the eccentric (6).
3. Tighten the screw (5).
4. Sew a test seam.
5. Check seam and cutting pattern.
102
NOTICE
Property damage may occur!
The corner knives plunge into the fabric sliding plate and become
damaged.
Pay attention to the position of the eccentric.
⑤ ⑥
(6) - Eccentric
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Corner knife