DURKOPP ADLER 745-35-10 F Service Instructions Manual page 209

Hide thumbs Also See for 745-35-10 F:

Table of Contents

2. Valve 1 (2) is pressed into the lower end position.

 Clamping bracket b (4) is lifted.

3. Loosen the screw on switch cam c (3) and turn switch cam c (3) on the

Fig. 195: Checking the function sequence (2)

(1) - Throw-over bracket d

(6) - Valve 2

(7) - Valve 4

Fig. 196: Checking the function sequence (3)

(10) - Valve 5

(11) - Valve 3

Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017

Switch cam c (3) that operates valve 1 (2) needs to be set such that

swivel bracket a (5) safely clamps the sewing material before clamping

bracket b (4) is lifted.

• Switch actuation point later (+): turn counterclockwise

• Switch actuation point earlier (-): turn clockwise

(8) - Switch cam e

(9) - Switch cam i

(12) - Switch cam g

(13) - Switch cam h