5.3 Setting the distance of the transport clamps to the folder
FIg. 75: Setting the distance of the transport clamps to the folder sole (1)
(1) - Transport clamp
Proper setting
There must be a specific distance between the outer edges of the folder
sole (2) and the inner edges of the transport clamps (1). The distance for
moderately heavy clothing fabric must be approx. 1.0 mm to 1.5 mm.
This distance is necessary to ensure both uniform piping strips and unhin-
dered transport of the sewing material.
88
sole
WARNING
Risk of injury from moving parts!
Crushing possible.
Check and set the transport clamps only with
utmost caution and with the machine switched on.
NOTICE
Property damage may occur!
The transport clamp may damage the folder sole.
The folder sole may damage the transport clamp.
The transport clamp position must be adjusted to the appropriate
folder.
①
②
(2) - Folder sole
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Transport clamps