Table of Contents
Advertisement
Piping cutter
14 Piping cutter
14.1 Setting the piping cutter to the pick-up folder
Fig. 165: Setting the piping cutter to the pick-up folder (1)
(1) - Pick-up folder
Order
First, check the following setting:
Proper setting
When completing their cut, the piping knives must run in the center groove
of the pick-up folder.
The pick-up folder tracks between both centering pins when lowered on
the piping cutter.
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
WARNING
Risk of injury from sharp parts!
Cutting injuries may be sustained.
NEVER reach into the area of the piping cutters.
①
• Align the pick-up folder ( p. 132)
(2) - Centering pins
②
177
Advertisement
Table of Contents
