Table of Contents
Advertisement
Feeding device
To place a new toothed belt:
1. Place a new toothed belt onto the toothed belt wheel (1).
2. Turn the cylinder (5) clockwise until reaching a value of 63°.
3. Place the toothed belt (2) onto the 2nd toothed belt wheel in such a
4. Insert the toothed belt wheel axle.
5. Set the lateral play and tighten the clamping nut (4).
13.5.2 Changing the upper toothed belt
Fig. 146: Changing the upper toothed belt
(1) - Toothed belt wheel
(2) - Clamping nut
(3) - Lever
Removing the old toothed belt
To remove the old toothed belt:
1. Loosen clamping nut (2).
2. Pull out the toothed belt wheel (4) with levers.
Placing a new toothed belt
To place a new toothed belt:
1. Place a new toothed belt onto the toothed belt wheel (4).
2. Insert the toothed belt wheel (1) with levers and axial disks into the
3. Slip on the axial disks.
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
way that the threaded pins (6) point to the right in horizontal direction
and downward in vertical direction.
①
②
While doing so, remove the toothed belt (5).
lever (3).
(4) - Toothed belt wheel
(5) - Toothed belt
⑤
④
③
161
Advertisement
Table of Contents
