Transport carriage
4
4.1 Rear end position of the transport carriage
Fig. 62: Rear end position of the transport carriage
(1) - Reference switch
(2) - Switching screw
Proper setting
The reference switch (1) determines the rear and, by means of a definitively
specified path, the front end position of the transport carriage.
The distance between the switching screw (2) and the reference switch (1)
must range between 0.5 mm and 1 mm.
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Transport carriage
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before setting the rear end
position of the transport carriage.
①
②
(3) - Transport carriage
(4) - Stop
④
③
73