Table of Contents
Advertisement
Winder
13 Winder
13.1 Setting the winder wheel to the toothed belt wheel
Fig. 36: Setting the winder wheel to the toothed belt wheel
(1) - Threaded pins
(2) - Toothed belt wheel
Proper setting
The distance between the winder wheel and the toothed belt wheel side is
0.8 mm.
1. Remove the arm cover ( p. 16).
1. Loosen the threaded pins (1).
2. Move the toothed belt wheel (2) to the right or left so that the distance
3. Tighten the threaded pins (1).
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before setting the winder.
from the winder wheel (3) is exactly 0.8 mm.
③
①
②
(3) - Winder wheel
47
Advertisement
Table of Contents
