Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
—
Return to
5.19 Time Announcement Service
5.19.1 Introduction to Time Announcement Service
With the time announcement service, a subscriber can dial the access number to the
XE IP PBX to query the current time. The time presented by the XE IP PBX is its current
system time.
5.19.2 Configuring Time Announcement Service
Table 5-26 Configure the time announcement service
Step
1
—
Return to
5.20 MyRing Service
5.20.1 Introduction to MyRing Service
The MyRing service is use to set customized ringback tone for a subscriber, so that
when the subscriber is called, the caller will hear the customized ringback tone.
Configuration
task
Configure
other call
Refer to
services
XE IP PBX Configuration
Configuration
task
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
Enable/disable
configured] in the navigation tree, and
the time
Select
announcement
configuration window to enable the time
service for a
announcement service for the subscriber.
subscriber
Clear this check box to disable the time
announcement service for the subscriber.
Command: srv-switch announce
(subscriber number view)
Configure
other call
Refer to
services
XE IP PBX Configuration
Chapter 5 Call Service Configuration
Description
Call Service
Overview.
Overview.
Description
[Announce
Time]
Call Service
Overview.
Overview.
5-31
Remarks
Optional
Remarks
in
the
Required
Optional
Advertisement
Table of Contents
