Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
1
2
IV. Configure rule-based number substitution
Table 4-17 Configure rule-based number substitution
Step
Basic configuration
1
Create and bind a number substitution rule table
Configuration
task
1)
Configure
2)
whether to
perform
Select the [Area Code Substitution] check
number
box in the configuration window to enable
substitution
number substitution.
when the LS
Clear the check box to disable the
sends
function.
numbers to the
Clear the check box if the called device
called device
supports the area code substitution function.
Command: area-code-substitute (LS-GW
view); area-code-substitute
(LS-OFFICEGROUP view)
1)
Configure
country/region
2)
code of the
gateway or
3)
office device
Command: area-code (LS-GW view);
area-code (LS-OFFICEGROUP view)
Configuration
task
Select [System View/Location Server] in the
navigation tree, and
Select the [Number Substitution] check
box in the configuration window to enable
Enable/disable
the function.
number
substitution
Clear this check box to disable the
function.
Command: policy num-substitute (LS
view)
Chapter 4 XE IP PBX Configuration
Description
Expand
[System
Server/Gateway]
View/Location Server/Office Group] in
the navigation tree.
Select the gateway or office group to be
configured, and
Expand [System View/Location Server/
Gateway] or [System View/Location
Server/Office Group] in the navigation
tree.
Select the gateway or office group to be
configured.
Set the country/region code correctly in
the configuration window.
Description
4-27
Remarks
View/Location
or
[System
Optional
Required
Remarks
Required
Advertisement
Table of Contents
