Configuring Cfb Service - H3C XE 200 User Manual

User Manual
H3C XE 200/2000 IP PBX G-Remote

5.10.6 Configuring CFB Service

Table 5-16 Configure the CFB service
Step
1
2
—
—
Return to
Configuration
task
1)
Add one or
more number
2)
bindings of the
CFB service
3)
To batch add forward numbers, click <Add>
in the [Add List Item] dialog box and add
numbers as desired.
Command: cfb-number (CFB view)
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable the
Select [Call Forwarding If Busy] in the
CFB service
configuration window to enable the CFB
for a
service for the subscriber.
subscriber
Clear this check box to disable the CFB
service for the subscriber.
Command: srv-switch cfb (subscriber
number view)
1)
Delete one or
more forward
2)
numbers of the
CFB service
To batch delete forward numbers, select the
desired numbers while pressing and holding
<Ctrl>, and then click <Delete>.
Command: undo cfb-number (CFB view)
Configure
other call Refer to
services
XE IP PBX Configuration
Chapter 5 Call Service Configuration
Description
Select [System
Server/Gateway/the gateway where the
subscriber to be
located/Subscriber/the subscriber to be
configured/Services/Call Forwarding If
Busy Table] in the navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
Set the forward number and click <Ok>.
Select [System
Server/Gateway/the gateway where the
subscriber to be
located/Subscriber/the subscriber to be
configured/Services/Call Forwarding If
Busy Table] in the navigation tree.
Select the forward number to be deleted
in the configuration window and click
<Delete>.
Call Service Overview.
Overview.
5-21
Remarks
View/Location
configured is
Required
Required
View/Location
configured is
Optional
Optional