Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
1
2
3
4
5
6
Configuration
task
1)
Configure the
2)
type of the
3)
gateway
Command: device-type (LS-GW view)
1)
Configure the
2)
IP address of
3)
the gateway
Command: ip-address (LS-GW view)
1)
Configure the
2)
port of the
3)
gateway
Command: port (LS-GW view)
1)
2)
Configure the
3)
call signal IPv4
address of the
For SIP UAC, this parameter does not need
gateway
to be configured.
Command: call-signal ip-address (LS-GW
view)
1)
2)
Configure the
3)
call signaling
port of the
gateway
For SIP UAC, this parameter does not need
to be configured.
Command: call-signal port (LS-GW view)
1)
2)
3)
Configure the
status of the
gateway
When selecting the Forever Online option,
you also need to correctly set the domain
that the device belongs to.
Command: device-status (LS-GW view)
Chapter 4 XE IP PBX Configuration
Description
Expand
[System
Server/Gateway] in the navigation tree.
Select the gateway to be configured.
Set the device type correctly in the
configuration window.
Expand
[System
Server/Gateway] in the navigation tree.
Select the gateway to be configured.
Set the device IP address correctly in
the configuration window.
Expand
[System
Server/Gateway] in the navigation tree.
Select the gateway to be configured.
Set the device port correctly in the
configuration window.
Expand
[System
Server/Gateway] in the navigation tree.
Select the gateway to be configured.
Set the call signal IP address correctly in
the configuration window.
Expand
[System
Server/Gateway] in the navigation tree.
Select the gateway to be configured.
Set the call signaling port correctly in the
configuration window.
Expand
[System
Server/Gateway] in the navigation tree.
Select the gateway to be configured.
Set the device status correctly in the
configuration window.
4-18
Remarks
View/Location
Required
View/Location
Required
View/Location
Required
View/Location
Required
View/Location
Required
View/Location
Optional
Advertisement
Table of Contents
