Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
5
IV. Configure Load Sharing
The operations configuring load sharing are similar to those configuring PS-GROUP
backup. Refer to
4.2.9 Configuring CPU Overload Protection
Table 4-21 CPU overload protection configuration
Step
Basic configuration
1
2
Configuration task
Configure the device type
of an office device
Configure PS-GROUP Backup
Configuration
task
1)
Configure the
2)
overload
protection
table
Command: cpu (overload protection view)
Select [System View/CPU Overload
Protection] in the navigation tree and
Select the [Start/Stop] check box in the
configuration window to enable CPU
Enable/disable
overload protection.
overload
protection
Clear this check box to disable the
function.
Command: start (CPU overload protection
view); stop (CPU overload protection view)
Description
1)
Select
View/Location
Server/Office
Group/the
group
configured/Office/the
office device to be
configured]
navigation tree.
2)
Set the device type
correctly
configuration
window.
Command: device-type
(LS-OFFICEGROUP-OF
FICE view)
for details.
Description
Select [System View/CPU Overload
Protection/Overload Protection Table] in
the navigation tree.
Click <Add> in the configuration window
and set the CPU usage rate and packet
drop rate correctly in the [Add List Item]
dialog box.
4-34
Chapter 4 XE IP PBX Configuration
Remarks
[System
office
to
be
in
the
Required
in
the
Remarks
Required
Required
Advertisement
Table of Contents
