User Manual
H3C XE 200/2000 IP PBX G-Remote
5.2.2 Configuring the Subscriber Status
Table 5-2 Configure the subscriber status
Step
—
—
Return to
5.3 Emergency Call Service
5.3.1 Introduction to Emergency Call Service
The emergency call service enables subscribers to call emergency numbers, namely,
some well-known special numbers that the administrator configured on the XE IP PBX
without limitation in emergency situations.
5.3.2 Configuring Emergency Call Numbers
Table 5-3 Configure emergency call numbers
Step
—
Configuration
task
1)
Configure
subscriber
2)
status
Command: subscriber-status (subscriber
management service)
Configure
other call
Refer to
services
XE IP PBX Configuration
Configuration
task
1)
2)
Add one or
3)
more
emergency
call numbers
You can click <Add> in the [Add List Item]
dialog box to batch add emergency call
numbers.
Command: emergency-call (emergency call
view)
Chapter 5 Call Service Configuration
Description
Select
[System
Server/Gateway/the gateway where the
subscriber
to
be
located/Subscriber/the subscriber to be
configured] in the navigation tree.
Set the subscriber status in the
configuration window.
Call Service
Overview.
Overview.
Description
Select
[System
Server/Emergency
Number Table] in the navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
Set the number to be added and click
<Ok>.
5-3
Remarks
View/Location
configured
is
Required
Optional
Remarks
View/Location
Call/Emergency
Required