Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
2
3
4
5
6
Configuration
task
1)
Configure the
2)
MS interface
Command: ms-config (MS view)
1)
Configure the
heartbeat
2)
password
between the
MS and LS
Command: heartbeat password (MS view)
1)
2)
Select the Local option to use the local
Configure the
LS.
LS mode
To use the remote LS, select the Remote
option and specify the IP address of the
LS correctly.
Command: ls-mode (MS view)
1)
Configure the
2)
MS-supported
language
Command: language (MS view)
Select [System View/Media Server] in the
navigation tree and
Select
Enable/disable
check box to enable the MS.
the MS
Clear this check box to disable the MS.
Command: start (MS view); stop (MS view)
Description
Select [System View/Media Server] in
the navigation tree.
Set the interface name correctly in the
configuration window.
Select [System View/Media Server] in
the navigation tree.
Set the heartbeat password correctly in
the configuration window.
Select [System View/Media Server] in
the navigation tree.
Set the location server argument in the
configuration window as follows:
Select [System View/Media Server] in
the navigation tree.
Set
the
desired
language
configuration window.
the
[System
4-12
Chapter 4 XE IP PBX Configuration
Remarks
Required
Required
Required
in
the
Optional
View/Start/Stop]
Required
Advertisement
Table of Contents
