Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
7
8
9
10
11
Configuration on the public PS
1
Configuration on the private PS
1
Configuration on NAT/FW
1
Configuration
task
Configure the
Refer to
PS information
details.
under the LS
Select [System View/Location
Server/Process Server/the PS to be
Configure the
configured] in the navigation tree and
PS to enable
Select the [Tunnel Enable] check box to
the NAT/FW
enable the function.
traversal
Clear this check box to disable the
function.
function.
Command: tunnel (LS-PS view)
1)
Configure the
domain that the
2)
PS belongs to
Command: belongto (LS-PS view)
1)
2)
Configure the
tunnel peer
You can click <Add> in the [Add List Item]
dialog box to batch add tunnel peers.
Command: tunnelpeer (LS-NAT&FW view)
Configure the
gateway or
Refer to sections
office
under the LS
information
information under the LS
under the LS
Configure the
Refer to
PS
Configure the
Refer to
PS
Refer to H3C XE 200/2000 IP PBX
Configure
Operation Manual for the NAT/FW
NAT/FW
configuration.
Chapter 4 XE IP PBX Configuration
Description
Configure the PS under the LS
Select
[System
Server/Process Server/the PS to be
configured] in the navigation tree.
Correctly set the domain that the PS
belongs to in the configuration window.
Select
[System
Server/Tunnel/Tunnel
navigation tree.
Click
<Add>
in
the
window, and set the parameters for the
tunnel peer correctly in the [Add List
Item] dialog box.
Configure MS information
and
Configure the office group
for details.
Configuring the PS
Configuring the PS
4-36
Remarks
for
Required
Required
View/Location
Required
View/Location
Peer]
in
the
configuration
Required
Required
for details.
Required
for details.
Required
Required
Advertisement
Table of Contents
