Changing Your Password; Managing Operation Rights Of Normal Administrators - H3C XE 200 User Manual

Ip pbx g-remote
Table of Contents

Advertisement

User Manual
H3C XE 200/2000 IP PBX G-Remote
Note:
The right level of a logged-in account cannot be modified.
An online account will be disconnected rightly after it is deleted.
If you keep the password field null when modifying an account, the original
password but not the null password will be adopted.
The <OK> button does not work in case no change is made.

6.1.4 Changing Your Password

A user can change one's own password after logging in. Click [Change Password] in
the device management window, and the [Change Password] dialog box appears, as
shown in
and then click <Ok> to make the new password effective.
Figure 6-2 Change password

6.1.5 Managing Operation Rights of Normal Administrators

The super administrator can control the rights of normal administrators by:
Permit/prohibit normal administrators' operations on a specific gateway or office
group.
Permit/prohibit normal administrators' right to add/delete a device.
Permit/prohibit normal administrators' right to run major commands.
The above configurations take effect after a normal administrator logs in through GUI
client, and thus the normal administrator can perform permitted operations.
I. Permit/prohibit normal administrators' operations on a specific gateway or
office group
This is to control the right of all normal administrators to operate the specific gateway or
office group under the LS.
Figure
6-2. Type your current password and new password in the proper fields
6-4
Chapter 6 System Management

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xe 2000

Table of Contents