Device Management Under The Ls - H3C XE 200 User Manual

User Manual
H3C XE 200/2000 IP PBX G-Remote
Figure 6-7 Manage multiple XE IP PBXs concurrently

6.7.2 Device Management Under the LS

In actual network environments, the XE IP PBX acting as an LS can be configured with
multiple gateways and office group devices, and you can easily query and modify the
configurations of these devices through the GUI client. Perform the following
configuration on a gateway.
I. Gateway list
Select [Gateway] in the navigation tree, and all the gateways configured on the LS will
be listed on the right pane of the configuration window, as shown in
information about the gateways is saved in a table. You can set a point in the list to start
your query and the displayed items per page. Double-click a gateway, and the GUI
client will list the configuration window of the gateway. Add an item for this gateway by
choosing [System View/Location Server/Gateway] in the navigation tree.
In the gateway list, you can select a [Gateway ID] check box to add the corresponding
item to [System View/Location Server/Gateway] in the navigation tree and display the
registration status of this gateway. In this way, you can know in time the running status
of important voice nodes in the network, and make timely troubleshooting.
6-14
Chapter 6 System Management
Figure 6-8. The