Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
For detailed configurations, refer to H3C XE 200/2000 IP PBX Operation Manual and
H3C XE 200/2000 IP PBX Command Manual.
4.2.3 Configuring the PS
I. Configure the basic information
Table 4-3 Configure the basic information
Step
Basic configuration
1
2
3
4
Configuration
task
1)
Configure the
2)
PS ID
Command: ps-config (PS view)
1)
Configure the
2)
PS interface
Command: ps-config (PS view)
1)
Configure the
2)
heartbeat
password
Command: heartbeat password (PS view)
1)
2)
3)
The index value also represents the priority of
the LS. The smaller the value is, the higher
Configure
the priority is. The LS with the highest priority
information of
is the primary LS, and other LSs are
the LS to
secondary ones.
which the PS
Select the Local option in the [Add List
belongs
Item] dialog box to configure the local LS
mode.
Select the Remote option and set the IP
address correctly in the [Add List Item]
dialog box to configure the remote LS
mode.
Command: ls-mode (PS view)
Description
Select [System View/Process Server] in
the navigation tree.
Set
the
PS
ID
configuration window.
Select [System View/Process Server] in
the navigation tree.
Set the interface correctly in the
configuration window.
Select [System View/Process Server] in
the navigation tree.
Set the heartbeat password correctly in
the configuration window.
Select [System View/Process Server/LS]
in the navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
Set the index and mode correctly.
4-6
Chapter 4 XE IP PBX Configuration
Remarks
correctly
in
the
Required
Required
Required
Required
Advertisement
Table of Contents
