User Manual
H3C XE 200/2000 IP PBX G-Remote
brief, the call pickup service enables a subscriber to answer an incoming call to another
subscriber.
5.16.2 Configuring Call Pickup Service
Table 5-23 Configure the call pickup service
Step
1
—
Return to
5.17 Call Intervention Service
5.17.1 Introduction to Call Intervention Service
Using the call intervention service, a subscriber can intervene into an ongoing call by
dialing the access code and the phone number of the caller/callee. Before exiting the
call, the intervening subscriber can choose to restore or terminate the original call
connection.
Configuration
task
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable/disable
Select [Call Pickup] in the configuration
the call pickup
window to enable the call pickup service
service for a
for the subscriber.
subscriber
Clear this check box to disable the call
pickup service for the subscriber.
Command: srv-switch cp (subscriber
number view)
Configure
other call
Refer to
services
XE IP PBX Configuration
Chapter 5 Call Service Configuration
Description
Call Service
Overview.
Overview.
5-29
Remarks
Required
Optional