Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Figure 6-8 Gateway list
Note:
The real-time statistics of network devices occupies a lot of system resources.
Therefore, minimize the quantity of network devices listed in the navigation tree.
Refer to the operation on gateways for operation on office devices.
II. Conditional query
The GUI client allows conditional query about gateways. Thus, you can quickly and
precisely find the required voice gateway to be configured. The operation procedure is
as follows:
Select [System View/Location Server/Gateway] in the navigation tree, and select
the [Conditional Query] check box on the left pane of the navigation tree, as shown
in
Figure
Select and set the correct query conditions in the list.
Set the query range by selecting the Query in This Page option or Query from the
Device option. The former allows you to query all gateways in the list of the current
page on the right pane, and the latter allows you to query gateways under the
entire LS.
6-9.
6-15
Chapter 6 System Management
Advertisement
Table of Contents
