Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
2
3
II. Configure PS-GROUP Backup
Table 4-19 Configure PS-GROUP backup
Step
Basic configuration
Configuration on the LS
1
Configuration task
Configure gateway
information on the primary
LS and all secondary LSs
Configure information about
the primary LS and
secondary LSs on the PS
Configuration
task
1)
Configure the
PS group that
2)
the LS
belongs to
Command: psgroup-id (LS-PS view)
Description
Refer to
Configure the
gateway under the LS
details.
1)
Select
View/Process
Server/LS]
navigation tree.
2)
Click <Add> in the
configuration window to
bring up the [Add List
Item] dialog box and
then set the index and
mode correctly.
The index value also
represents the priority of the
LS. The LS with the highest
priority is the primary LS.
Select the Local option
in the [Add List Item]
dialog box when the LS
and PS are located on
the same XE IP PBX.
Select
option in the [Add List
Item] dialog box when
the LS and PS are
located on different XE
IP PBXs. In this case,
you need to set the IP
address correctly. Set
the port when needed.
Command: ls-mode (PS
view)
Description
Expand
[System
Server/Process Server] in the navigation
tree and select the PS to be configured.
Set the PS group name correctly in the
configuration window.
4-31
Chapter 4 XE IP PBX Configuration
Remarks
for
Required
[System
in
the
Required
the
Remote
Remarks
View/Location
Required
Advertisement
Table of Contents
