Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
II. Configure the information about the voice subscriber line number
Table 4-15 Configure the information about the voice subscriber line number
Step
Basic configuration
1
2
III. Configure area code substitution
Table 4-16 Configure area code substitution
Step
Basic configuration
Configuration on the LS
1
Configuration on the gateway/office group
Configuration
task
1)
Add a voice
2)
subscriber line
number
Command: subscriber (LS-GW view)
1)
Configure the
priority of the
2)
voice
subscriber line
3)
number
Command: priority (subscriber view)
Configuration
task
Select [System View/Location Server] in the
navigation tree, and
Select the [Area Code Substitution] check
box in the configuration window to enable
Enable/disable
the function.
area code
substitution
Clear this check box to disable the
function.
Command: policy area-code-substitute
(LS view)
Description
Expand
[System
Server/Gateway/the
configured/Subscriber] in the navigation
tree.
Click <Add> in the configuration window
and set the short number and long
number correctly in the [Add List Item]
dialog box.
Expand
[System
Server/Gateway/the
configured/Subscriber] in the navigation
tree.
Select the voice subscriber line number
to be configured.
Set the priority of the subscriber line
number correctly in the configuration
window.
Description
4-26
Chapter 4 XE IP PBX Configuration
Remarks
View/Location
gateway
to
be
Required
View/Location
gateway
to
be
Optional
Remarks
Required
Advertisement
Table of Contents
