Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Table 6-7 Configure the self-service
Step
1
2
6.2 Device Status Query
Click the [Device Status] tab in the device management window to display the CPU
usage of tasks running on the XE IP PBX. Curves in different colors are used to display
history data, as shown in
Configuration task
Enable/disable the
self-service for a
subscriber
Configure the
self-service login
password for a
subscriber
Figure
Description
Select [System View/Location
Server/Gateway/the gateway
where the subscriber to be
configured is
located/Subscriber/the subscriber
to be configured] in the navigation
tree, and
Select [GUI Service] in the
configuration window to enable
the
self-service
subscriber.
Clear this check box to disable
the
self-service
subscriber.
Command:
2.2.5 "Configuring
Self-service" srv-switch gui
(subscriber number view)
1)
Select [System View/Location
Server/Gateway/the gateway
where the subscriber to be
configured
located/Subscriber/the
subscriber to be configured] in
the navigation tree.
2)
Set the password in the [GUI
User Password] text box in the
configuration window.
Command: gui-pwd (subscriber
number view)
6-3.
6-9
Chapter 6 System Management
Remarks
Required
for
the
for
the
is
Optional
Advertisement
Table of Contents
