H3C XE 200 User Manual
  1. Manuals
  2. Brands
  3. H3C Manuals
  4. Network Hardware
  5. XE 200
  6. User manual
H3C XE 200 User Manual

H3C XE 200 User Manual

Ip pbx g-remote
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
H3C XE 200/2000 IP PBX G-Remote
Chapter 1 GUI Overview ............................................................................................................... 1-1
Chapter 2 GUI Server Configuration............................................................................................ 2-1
2.1 GUI Server Configuration Prerequisites ............................................................................ 2-1
2.2 GUI Server Configuration Procedure................................................................................. 2-1
2.2.1 Enabling the GUI Server ......................................................................................... 2-1
2.2.2 Displaying the User Information List ....................................................................... 2-1
2.2.3 Clearing the User Information List........................................................................... 2-2
2.2.4 Web Service ............................................................................................................ 2-2
2.2.5 Configuring Self-service .......................................................................................... 2-3
2.2.6 Configuring Operation Rights of Normal Administrators ......................................... 2-4
2.2.7 GUI Server Configuration Example......................................................................... 2-7
Chapter 3 GUI Client Configuration............................................................................................. 3-1
3.1 Installing GUI Client ........................................................................................................... 3-1
3.1.1 GUI Client Installation Procedure............................................................................ 3-1
3.2 Introduction to Interfaces ................................................................................................... 3-4
3.2.1 Tool Bar................................................................................................................... 3-4
3.2.2 Device Management Window ................................................................................. 3-4
3.2.3 Output Window........................................................................................................ 3-7
3.3 Login Management ............................................................................................................ 3-7
3.3.1 Login........................................................................................................................ 3-7
3.3.2 Close Connection.................................................................................................. 3-10
3.4 Operations on the GUI Client........................................................................................... 3-10
3.4.1 Configuring Device Parameters ............................................................................ 3-10
3.4.2 Restoring the Default Values ................................................................................ 3-13
3.4.3 Enabling/Disabling a Voice Service or a Feature.................................................. 3-14
Chapter 4 XE IP PBX Configuration............................................................................................. 4-1
4.1 XE IP PBX Overview ......................................................................................................... 4-1
4.2 XE IP PBX Configuration ................................................................................................... 4-1
4.2.1 XE IP PBX Configuration Overview ........................................................................ 4-1
4.2.2 Configuring Interfaces ............................................................................................. 4-4
4.2.3 Configuring the PS .................................................................................................. 4-6
4.2.4 Configuring Media Resources............................................................................... 4-10
4.2.5 Configuring the MS ............................................................................................... 4-11
4.2.6 Configuring the LS ................................................................................................ 4-13
4.2.7 Configuring the VoIP Network Dialup Scheme ..................................................... 4-25
4.2.8 Configuring Backup and Load Sharing ................................................................. 4-30
4.2.9 Configuring CPU Overload Protection .................................................................. 4-34

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading

Related Manuals for H3C XE 200

Summary of Contents for H3C XE 200

  • Page 1: Table Of Contents

    User Manual H3C XE 200/2000 IP PBX G-Remote Table of Contents Table of Contents Chapter 1 GUI Overview ....................... 1-1 Chapter 2 GUI Server Configuration.................... 2-1 2.1 GUI Server Configuration Prerequisites ................2-1 2.2 GUI Server Configuration Procedure................. 2-1 2.2.1 Enabling the GUI Server ..................2-1 2.2.2 Displaying the User Information List ...............
  • Page 2 User Manual H3C XE 200/2000 IP PBX G-Remote Table of Contents 4.2.10 Configuring NAT/FW Tunnel Traversal ............... 4-35 4.2.11 Configuring Voice RADIUS Accounting .............. 4-37 Chapter 5 Call Service Configuration..................5-1 5.1 Call Service Overview......................5-1 5.2 Subscriber Management Service..................5-2 5.2.1 Introduction to Subscriber Management Service ............
  • Page 3 User Manual H3C XE 200/2000 IP PBX G-Remote Table of Contents 5.12.1 Introduction to ONLY Service................5-24 5.12.2 Configuring ONLY Service .................. 5-24 5.13 Time Limit Call Service ....................5-25 5.13.1 Introduction to Time Limit Call Service ............... 5-25 5.13.2 Configuring Time Limit Call Service ..............5-26 5.14 Third Party Call Control Service ..................
  • Page 4 User Manual H3C XE 200/2000 IP PBX G-Remote Table of Contents 5.26.1 Introduction to Alarm Clock Service..............5-41 5.26.2 Configuring Alarm Clock Service ................ 5-42 Chapter 6 System Management ....................6-1 6.1 User Management ......................6-1 6.1.1 User Account Levels ....................6-1 6.1.2 Naming Rule and Rights for Users................

  • Page 5: Chapter 1 Gui Overview

    Chapter 1 GUI Overview Chapter 1 GUI Overview H3C XE 200/2000 IP PBX (hereinafter referred to as the XE IP PBX) provides graphical user interfaces (GUIs) to enable easy configurations. GUI is classified as GUI server and GUI client. The GUI server runs inside the XE IP PBX, and the GUI client runs on a PC with Microsoft Windows operating systems.

  • Page 6: Chapter 2 Gui Server Configuration

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration Chapter 2 GUI Server Configuration 2.1 GUI Server Configuration Prerequisites On the XE IP PBX, the interface connected to Ethernet is configured with a correct IP address and subnet mask, and is reachable to the PC running the GUI client software.

  • Page 7: Clearing The User Information List

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration Table 2-2 Display the user information list Operation Command Remarks Required. Keyword all is to display information of Display the user display gui-user { all | all administrators and...

  • Page 8: Configuring Self-Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration By default, there are ten files in the flash:/web directory on the XE IP PBX: index.html, zh_down.html, en_down.html, g-remote_ch.exe, g-remote_en.exe, banner.jpg, zh_down.png, en.png, zh.png, and zh_describe.png. Note: The above mentioned xxx.xxx.xxx.xxx represents the IP address of the XE IP PBX,...

  • Page 9: Configuring Operation Rights Of Normal Administrators

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration Before a user logs onto the GUI server, the GUI server and self-service must be enabled. Note: About details about user classification, refer to Naming Rule and Rights for Users.
  • Page 10 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration Operation Command Remarks Enter LS view location-server — Enter LS-GW view gateway gateway-id — Permit/prohibit normal administrators’ operations on access { permit | prohibit } Required a specific gateway II.
  • Page 11 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration V. Permit/prohibit normal administrators’ right to run commands in gateway view Table 2-10 Permit/prohibit normal administrators’ right to run commands in gateway view Operation Command Remarks Enter system view system-view —...

  • Page 12: Gui Server Configuration Example

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 2 GUI Server Configuration 2.2.7 GUI Server Configuration Example I. Network requirements Enable the GUI server on the XE IP PBX and enable the Web service. II. Configuration procedure <XE>system-view # Configure the Ethernet interface.

  • Page 13: Chapter 3 Gui Client Configuration

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Chapter 3 GUI Client Configuration 3.1 Installing GUI Client 3.1.1 GUI Client Installation Procedure The GUI client installation software is located in the flash:/web directory on the XE IP PBX.
  • Page 14 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Figure 3-1 GUI client download page Select [XE G-Remote English Version] on the GUI client download page and the [File Download] dialog box pops up, as shown in Figure 3-2.
  • Page 15 <Install>. During the installation, a progress bar appears at the bottom of the dialog box. Figure 3-4 “XE-GUI Client” installation dialog box After the installation, the [G-Remote] item appears in the [Start/Program/H3C] menu, and a G-Remote shortcut is added to the desktop. Run the GUI client.

  • Page 16: Introduction To Interfaces

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Double-click the G-Remote shortcut on the desktop. Double-click the G-Remote.exe icon in the folder where the GUI client is installed. 3.2 Introduction to Interfaces 3.2.1 Tool Bar The GUI client software provides you with a shortcut tool bar, including the commonly used <Login>, <Close Connection>, <Output Bar>, and <About G-Remote>...
  • Page 17 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration I. Navigation tree All the configuration items for the XE IP PBX are included on the navigation tree shown Figure 3-7. Here, you can query all the configuration data and status information, and change the configuration data.
  • Page 18 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Figure 3-8 Navigation bar III. Configuration window The configuration window shown in Figure 3-9 contains all the configuration parameters and is a main operating interface for you to use the GUI client to manage the XE IP PBX.

  • Page 19: Output Window

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration 3.2.3 Output Window The output window shown in Figure 3-10 outputs all system prompts, including the information about query operations, execution of commands, connection interruption, and query timeout during the configuration management.
  • Page 20 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Alternatively, you can display the [Login Management] dialog box through the menu or tool bar shown in Figure 3-12 Figure 3-13 respectively. Figure 3-12 Display the [Login Management] dialog box through the menu Figure 3-13 Display the [Login Management] dialog box through the tool bar I.
  • Page 21 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Select a to-be-modified device from the device list on the [Login Management] page and click <Modify> to bring up the [Device Add/Modify] page. You can modify the device name, IP address, port number, and description of the GUI server.

  • Page 22: Close Connection

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration 3.3.2 Close Connection After logging into the XE IP PBX successfully, you can open the [Close Connection] dialog box through the menu or the tool bar. See...
  • Page 23 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Figure 3-18 Figure 3-19 show a parameter before and after value assignment respectively. Figure 3-18 Parameter – before value assignment Figure 3-19 Parameter – after value assignment...
  • Page 24 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Figure 3-20 Click <Apply> to validate the setting II. Parameters provided with optional values To assign an optional value to such a parameter, click the parameter, and then select a value from the corresponding drop-down list for configuration.

  • Page 25: Restoring The Default Values

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration III. Parameters configured by options To assign a value to such a parameter, select one from the option list under the parameter. Figure 3-23 Select a value from the option list IV.

  • Page 26: Enabling/Disabling A Voice Service Or A Feature

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 3 GUI Client Configuration Figure 3-25 Restore the default values 3.4.3 Enabling/Disabling a Voice Service or a Feature To enable a voice service or a feature, select the corresponding check box. To disable a voice service or a feature, clear the corresponding check box.

  • Page 27: Chapter 4 Xe Ip Pbx Configuration

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Chapter 4 XE IP PBX Configuration 4.1 XE IP PBX Overview The XE IP PBX supports both session initiation protocol (SIP) and H.323 recommendation, and thus is suitable for complex networks deployed with both SIP and H.323 devices.
  • Page 28 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration The following table describes the basic procedure for configuring the XE IP PBX in a centralized network: Table 4-1 Basic configuration procedure of the XE IP PBX...
  • Page 29 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Step Configuration task Description Detail Remarks Expand [Process Server] navigation tree. Select the H.323 Sections Enable the SIP gatekeeper and/or 4.2.3 II. server and/or H.323 Required...

  • Page 30: Configuring Interfaces

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Step Configuration task Description Detail Remarks The dialup scheme for the VoIP network static includes the static route Configure a dialup prefix configuration, Section scheme for the VoIP...
  • Page 31 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Table 4-2 Ethernet interface configuration Configuration Step Description Remarks task Basic configuration Expand [Interface] in the navigation tree. Set the IP Select an Ethernet interface that is address of the used to access the user network.

  • Page 32: Configuring The Ps

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration For detailed configurations, refer to H3C XE 200/2000 IP PBX Operation Manual and H3C XE 200/2000 IP PBX Command Manual. 4.2.3 Configuring the PS I. Configure the basic information...
  • Page 33 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Select [System View/Process Server] in the navigation tree and Select the [Start/Stop] check box in the Start/stop the Required configuration window to start the PS.
  • Page 34 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration II. Configure the gatekeeper Table 4-4 Configure the gatekeeper Configuration Step Description Remarks task Basic configuration Select [System View/Process Server/Gatekeeper] in the navigation tree. Select the [Start/Stop] check box in the...
  • Page 35 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Select [System View/Process Server/Gatekeeper] in the navigation tree, Configure the Select the [Transmit LRQ] check box to set the LRQ processing method of the GK —...

  • Page 36: Configuring Media Resources

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration 4.2.4 Configuring Media Resources Table 4-6 Configure the media resource Configuration Step Description Remarks task Basic configuration Select [System View/Media Ability/Language] in the navigation tree. Click <Add> in the configuration window to bring up the [Add List Item] dialog box.

  • Page 37: Configuring The Ms

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Select [System View/Media Ability/Language/the language to be configured/Format] in the navigation tree. Delete a In the configuration window, select the media file format to be deleted and click <Delete>.
  • Page 38 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Select [System View/Media Server] in the navigation tree. Configure the Set the interface name correctly in the Required MS interface configuration window.

  • Page 39: Configuring The Ls

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration II. Query the predefined languages and media formats supported by the MS Table 4-8 Query the predefined languages and media formats supported by the MS Configuration...
  • Page 40 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Select [System View/Location Server] in the navigation tree. Set the SIP call mode or H.323 call Configure the Required mode correctly in the configuration call mode window.
  • Page 41 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Select [System View/Location Server] in the navigation tree, and Select the [Number Substitution] check Enable/disable box in the configuration window to enable rule-based the function.
  • Page 42 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Advanced configuration Expand [System View/Location Server/Process Server] in the navigation tree. Select process server Configure configured. whether to Select the [Multiplex] check box in the —...
  • Page 43 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration IV. Configure the gateway under the LS Table 4-12 Configure the gateway under the LS Configuration Step Description Remarks task Basic configuration Select [System View/Location Server/Gateway] in the navigation tree.
  • Page 44 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Gateway] in the navigation tree. Configure the Select the gateway to be configured. type of the Required Set the device type correctly in the gateway configuration window.
  • Page 45 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Gateway] in the navigation tree. Configure the Select the gateway to be configured, default priority Optional and set the priority correctly in the of the gateway configuration window.
  • Page 46 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Gateway] in the navigation tree. Select the gateway to be configured and Select the [Multiplex] check box in the...
  • Page 47 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration V. Configure the office group information under the LS Table 4-13 Configure the office group information under the LS Configuration Step Description Remarks task Basic configuration...
  • Page 48 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Office Group/the office group to be configured/Prefix] in the navigation tree. Delete one or Select the static route prefix to be...
  • Page 49 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Office device basic configuration Expand [System View/Location Server/Office Group/the office group to be configured/Office] in the navigation tree. Configure the Select the office device to be configured...
  • Page 50 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Office Group//the office group to be configured/Office] in the navigation tree. Select the office device to be configured...

  • Page 51: Configuring The Voip Network Dialup Scheme

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration 4.2.7 Configuring the VoIP Network Dialup Scheme I. Configure a static route prefix Table 4-14 Configure a static route prefix Configuration Step Description Remarks task Basic configuration...
  • Page 52 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration II. Configure the information about the voice subscriber line number Table 4-15 Configure the information about the voice subscriber line number Configuration Step Description Remarks task...
  • Page 53 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Gateway] [System View/Location Server/Office Group] in the navigation tree. Configure Select the gateway or office group to be...
  • Page 54 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server] in the navigation tree. Select the number substitution table. Click <Add> in the configuration window Create a...
  • Page 55 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Gateway] [System View/Location Server/Office Group] in the navigation tree. Expand the gateway or office group to be configured.

  • Page 56: Configuring Backup And Load Sharing

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Server/Gateway] [System View/Location Server/Office Group] in the navigation tree and the gateway or office group to be configured.
  • Page 57 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Step Configuration task Description Remarks Configure gateway Refer to Configure the information on the primary gateway under the LS Required LS and all secondary LSs details.
  • Page 58 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Configure the Server/Process Server] in the navigation gatekeeper tree and the PS to be configured. port number Set the RAS port correctly in the...
  • Page 59 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Configuration Step Description Remarks task Expand [System View/Location Configure the Server/Gateway] in the navigation tree. voice Select the gateway to be configured. subscriber line Required Set the subscriber line count correctly in count allowed the configuration window.

  • Page 60: Configuring Cpu Overload Protection

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Step Configuration task Description Remarks Select [System View/Location Server/Office Group/the office group configured/Office/the office device to be configured] Configure the device type Required navigation tree. of an office device...

  • Page 61: Configuring Nat/Fw Tunnel Traversal

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration 4.2.10 Configuring NAT/FW Tunnel Traversal Table 4-22 NAT/FW tunnel traversal configuration Configuration Step Description Remarks task Configuration on the public LS Configure the Ethernet Select [System View/Location Server] in the...
  • Page 62 Configuring the PS for details. Required Configuration on the private PS Configure the Refer to Configuring the PS for details. Required Configuration on NAT/FW Refer to H3C XE 200/2000 IP PBX Configure Operation Manual for the NAT/FW Required NAT/FW configuration. 4-36...

  • Page 63: Configuring Voice Radius Accounting

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration 4.2.11 Configuring Voice RADIUS Accounting Table 4-23 Configure voice RADIUS accounting Step Configuration task Description Remarks Select [System View/Radius Service] in the navigation tree, Select the [AAA Start/Stop] in the configuration window to enable AAA.
  • Page 64 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 4 XE IP PBX Configuration Step Configuration task Description Remarks Select [System View/Location Server/Office Group/the office group to be configured/Office/the office device to be configured] in the navigation tree, and Select [ACCT Switch] in the...

  • Page 65: Chapter 5 Call Service Configuration

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Chapter 5 Call Service Configuration 5.1 Call Service Overview Table 5-1 Basic configurations of the XE IP PBX Step Configuration task Description Remarks Refer to Subscriber Configure the subscriber —...

  • Page 66: Subscriber Management Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Step Configuration task Description Remarks Configure the call pickup Refer to Call Pickup — Optional service Service for details. Configure the call Refer to Call Intervention —...

  • Page 67: Configuring The Subscriber Status

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.2.2 Configuring the Subscriber Status Table 5-2 Configure the subscriber status Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be Configure configured] in the navigation tree.

  • Page 68: Call Limit Group Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Emergency Call/Emergency Number Table] in the navigation tree. Select the emergency call number to be Delete one or deleted and click <Delete>.

  • Page 69: Configuring Call Limit Groups

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.4.2 Configuring Call Limit Groups Table 5-4 Configure call limit groups Step Configuration task Description Remarks Select [System View/Location Server/Call Limit Group/Call Limit Group Table] navigation tree.

  • Page 70: Configuring Call Limit Group Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Step Configuration task Description Remarks Select [System View/Location Server/Call Limit Group/Call Limit Group Table] navigation tree. Select the call limit group to be deleted configuration Delete one or more window and click <Delete>.

  • Page 71: Outgoing Call Authority Control Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is located/Subscriber/the subscriber to be Enable/disable configured] in the navigation tree, and...
  • Page 72 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Call Limit Group/Subscriber Type/the subscriber number type to be configured/Type Formula] navigation tree. Configure one Click <Add> in the configuration window...
  • Page 73 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Subscriber Role] navigation tree. Click <Add> in the configuration window Add one or to bring up the [Add List Item] dialog more box.

  • Page 74: Configuring Outgoing Call Authority Control Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.5.3 Configuring Outgoing Call Authority Control Service Table 5-7 Configure the outgoing call authority control service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the...

  • Page 75: Configuring Abbreviated Dialing Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.6.2 Configuring Abbreviated Dialing Service Table 5-8 Configure the abbreviated dialing service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 76: Configuring Do-Not-Disturb Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.7.2 Configuring Do-Not-Disturb Service Table 5-9 Configure the do-not-disturb service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 77: Configuring Calling Line Identification Control Services

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration CLIR override 5.8.2 Configuring Calling Line Identification Control Services Table 5-10 Configure the calling line identification control services Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the...

  • Page 78: Password Call Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is located/Subscriber/the subscriber to be configured] in the navigation tree, and...

  • Page 79: Call Forwarding Services

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be Configure the configured] in the navigation tree, and Required...

  • Page 80: Configuring Cfu Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.10.2 Configuring CFU Service Table 5-12 Configure the CFU service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be configured/Services/Unconditional Call Forwarding Table] in the navigation tree.

  • Page 81: Configuring Cfc Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.10.3 Configuring CFC Service Table 5-13 Configure the CFC service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be...

  • Page 82: Configuring Cft Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Return to XE IP PBX Configuration Overview. 5.10.4 Configuring CFT Service Table 5-14 Configure the CFT service Configuration Step Description Remarks task...

  • Page 83: Configuring Cfo Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be configured/Services/Call Forwarding According To Time Table] in the Delete one or navigation tree.
  • Page 84 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is located/Subscriber/the subscriber to be configured] in the navigation tree, and...

  • Page 85: Configuring Cfb Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.10.6 Configuring CFB Service Table 5-16 Configure the CFB service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be configured/Services/Call Forwarding If Busy Table] in the navigation tree.

  • Page 86: Configuring Cfnr Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.10.7 Configuring CFNR Service Table 5-17 Configure the CFNR service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be...

  • Page 87: Third Party Call Termination Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Configure — other call Refer to Call Service Overview. Optional services Return to XE IP PBX Configuration Overview. 5.11 Third Party Call Termination Service 5.11.1 Introduction to Third Party Call Termination Service...

  • Page 88: Only Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Configure — other call Refer to Call Service Overview. Optional services Return to XE IP PBX Configuration Overview. 5.12 ONLY Service 5.12.1 Introduction to ONLY Service The one number link you (ONLY) service can be used to assign an ID, which uniquely identifies a user.

  • Page 89: Time Limit Call Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/ONLY Service/the user ID to be configured/User Number Table] in the navigation tree. Delete one or Select the telephone number to be...

  • Page 90: Configuring Time Limit Call Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.13.2 Configuring Time Limit Call Service Table 5-20 Configure the time limit call service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 91: Configuring Third Party Call Control Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.14.2 Configuring Third Party Call Control Service Table 5-21 Configure the third party call control service Configuration Step Description Remarks task Select [System View/Location Server/Service/Third Party Control Call] in the navigation tree.

  • Page 92: Configuring Callback-On-Busy

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.15.2 Configuring Callback-On-Busy Table 5-22 Configure the callback-on-busy service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is located/Subscriber/the subscriber to be...

  • Page 93: Configuring Call Pickup Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration brief, the call pickup service enables a subscriber to answer an incoming call to another subscriber. 5.16.2 Configuring Call Pickup Service Table 5-23 Configure the call pickup service...

  • Page 94: Configuring Call Intervention Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.17.2 Configuring Call Intervention Service Table 5-24 Configure the call intervention service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 95: Time Announcement Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Configure — other call Refer to Call Service Overview. Optional services Return to XE IP PBX Configuration Overview. 5.19 Time Announcement Service 5.19.1 Introduction to Time Announcement Service...

  • Page 96: Configuring Myring Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration You can divide callers into different caller groups and assign different customized ringback tones to subscribers in different caller groups. Callers in different groups will hear different ringback tones when calling a MyRing-enabled subscriber. When a subscriber in none of the defined caller groups calls the MyRing-enabled subscriber, the caller hears the default customized ringback tone set by the callee.

  • Page 97: Cpcp Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber configured located/Subscriber/the subscriber to be Configure the configured/Services/My Ring/Caller customized Group/the caller group to be configured] —...

  • Page 98: Configuring Cpcp Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.21.2 Configuring CPCP Service Table 5-28 Configure the CPCP service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 99: Configuring Automatic Operator Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.22.2 Configuring Automatic Operator Service Table 5-29 Configure the automatic operator service Configuration Step Description Remarks task Select [System View/Location Server/Service/Auto Operator] in the navigation tree. Configure the Click <Add>...
  • Page 100 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration I. Local group notification service The administrator defines a local group notification task. When the preset time comes, the XE IP PBX will automatically initiate a call to all subscribers in the specified group.

  • Page 101: Configuring Group Notification Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.23.2 Configuring Group Notification Service Table 5-30 Configure the group notification service Configuration Step Description Remarks task Receiver group configuration Select [System View/Location Server/Service/Group Notify/Notify Group] in the navigation tree.
  • Page 102 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Configure the Server/Service/Group Notify/Notify local group Config/the notification task notification configured] in the navigation tree. service and In the configuration window, select the...

  • Page 103: Call Transfer Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuration Step Description Remarks task Select [System View/Location Server/Service/Group Notify/Started Notify] in the navigation tree. Click <Add> in the configuration window to bring up the [Add List Item] dialog box.

  • Page 104: Configuring Call Transfer Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.24.2 Configuring Call Transfer Service Table 5-31 Configure the call transfer service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 105: Configuring Number Query Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.25.2 Configuring Number Query Service Table 5-32 Configure the number query service Configuration Step Description Remarks task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...

  • Page 106: Configuring Alarm Clock Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration 5.26.2 Configuring Alarm Clock Service Table 5-33 Configure the alarm clock service Configuratio Step Description Remarks n task Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is...
  • Page 107 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 5 Call Service Configuration Configuratio Step Description Remarks n task Configure — other call Refer to Call Service Overview. Optional services Return to XE IP PBX Configuration Overview. 5-43...

  • Page 108: Chapter 6 System Management

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Chapter 6 System Management 6.1 User Management 6.1.1 User Account Levels GUI of the XE IP PBX enables Web-based configuration and management by dividing users into levels, each with different rights. Three user levels are provided:...

  • Page 109: Naming Rule And Rights For Users

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management 6.1.2 Naming Rule and Rights for Users Table 6-2 Naming rule and rights for users User level Naming rule Available operations Account management, including adding, modifying deleting administrator accounts.
  • Page 110 The GUI server supports up to 40 GUI client administrator accounts. The [Account Info] list displays usernames, rights and IP addresses of users. IP address “N/A” indicates the corresponding user is offline. Numbers of user accounts allowed to manage the XE 200/2000 through the GUI client concurrently are listed in Table 6-3.

  • Page 111: Changing Your Password

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Note: The right level of a logged-in account cannot be modified. An online account will be disconnected rightly after it is deleted. If you keep the password field null when modifying an account, the original password but not the null password will be adopted.
  • Page 112 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Table 6-4 Permit/prohibit normal administrators’ operations on a specific gateway or office group Configuratio Step Description Remarks n task Expand [System View/Location Server/Gateway] in the navigation tree, and select the gateway to be configured.
  • Page 113 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Table 6-5 Permit/prohibit normal administrators’ right to add/delete a device Step Configuration task Description Remarks Expand [System View/Location Server] in the navigation tree and select [List Access Control].
  • Page 114 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Table 6-6 Permit/prohibit normal administrators’ right to run major commands Step Configuration task Description Remarks Expand [System View/Location Server] in the navigation tree and select [Command Access Control].

  • Page 115: Configuring Self-Service

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Step Configuration task Description Remarks Expand [System View/Location Server] in the navigation tree. Select [Command Access Control]. In the configuration window. Select the desired option and then click <Delete>.

  • Page 116: Device Status Query

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Table 6-7 Configure the self-service Step Configuration task Description Remarks Select [System View/Location Server/Gateway/the gateway where the subscriber to be configured is located/Subscriber/the subscriber to be configured] in the navigation...
  • Page 117 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-3 Device status window The operation method is as follows: From the task list, select the tasks whose statistics information you want to display in curves. The corresponding CPU usage statistics appears on the right pane.

  • Page 118: Telnet Login

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Note: When the log function is disabled and the device status window is closed, the GUI client does not make CPU usage statistics. When the log function is enabled, the GUI client records the system status in a real-time way, and saves the record in the log file.

  • Page 119: Statistics Query

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Backup or Recovery option as needed. Save the backup file with extension “.xeb”, as shown in Figure 6-5. In the backup operation, you need to set the path to save the configuration file. A default configuration file name is generated automatically on the basis of the system date, and you can modify it if necessary.

  • Page 120: Multi-Device Management

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-6 The statistics window Note: If the log function is disabled, the GUI client makes the CPU usage statistics only when the device status window is opened. With the [Log Data] check box selected, the GUI client records the system status in a real-time way, and saves the record in the log file.

  • Page 121: Device Management Under The Ls

    User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-7 Manage multiple XE IP PBXs concurrently 6.7.2 Device Management Under the LS In actual network environments, the XE IP PBX acting as an LS can be configured with multiple gateways and office group devices, and you can easily query and modify the configurations of these devices through the GUI client.
  • Page 122 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-8 Gateway list Note: The real-time statistics of network devices occupies a lot of system resources. Therefore, minimize the quantity of network devices listed in the navigation tree.
  • Page 123 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-9 Conditional query on the current page Note: In the Query from the Device option, after you set the correct query conditions, click <Query> to display the gateways that satisfy the query conditions. If no gateway satisfies the condition, the list is null.
  • Page 124 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-10 The use of the Ctrl key IV. Floating and docking During the configuration of the XE IP PBX through the GUI client, a configuration sub-window that appears as a tab on the configuration window is called a docking...
  • Page 125 User Manual H3C XE 200/2000 IP PBX G-Remote Chapter 6 System Management Figure 6-12 A floating window V. Keyboard operation Use the arrow keys to move the focus in the navigation tree. Use the Space key to open the configuration window corresponding to the selected node in the navigation tree.

This manual is also suitable for:

Xe 2000

Table of Contents