Configuring Calling Line Identification Control Services - H3C XE 200 User Manual

User Manual
H3C XE 200/2000 IP PBX G-Remote
CLIR override

5.8.2 Configuring Calling Line Identification Control Services

Table 5-10 Configure the calling line identification control services
Step
—
—
—
Configuration
task
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable/disable
Select [Caller Number Display] in the
the CLIP
configuration window to enable the CLIP
service for a
service.
subscriber
Clear this check box to disable the CLIP
service.
Command: srv-switch clip (subscriber
number view)
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable/disable
Select [Restriction Of Caller Number
the CLIR
Display] in the configuration window to
service for a
enable the CLIR service.
subscriber
Clear this check box to disable the CLIR
service.
Command: srv-switch clir (subscriber
number view)
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
Enable/disable
configured] in the navigation tree, and
the temporary
Select [Temporary Restriction Of Caller
reservation for
Number Display] in the configuration
CLIP and
window
CLIR service
reservation for CLIP and CLIR service.
for a
Clear this check box to disable the
subscriber
temporary reservation for CLIP and CLIR
service.
Command: srv-switch tcir (subscriber
number view)
Chapter 5 Call Service Configuration
Description
to enable the
5-13
Remarks
Required
Required
Required
temporary