Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Step
Return to
5.10.4 Configuring CFT Service
Table 5-14 Configure the CFT service
Step
1
2
Configuration
task
XE IP PBX Configuration
Configuration
task
1)
Add one or
more number
2)
bindings of the
CFT service
3)
To batch add number bindings, click <Add>
in the [Add List Item] dialog box and add
bindings as desired.
Command: cft (CFT view)
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable the
Select [Call Forwarding According To
CFT service
Time] in the configuration window to
for a
enable
subscriber
subscriber..
Clear this check box to disable the CFT
service for the subscriber.
Command: srv-switch cft (subscriber
number view)
Chapter 5 Call Service Configuration
Description
Overview.
Description
Select
[System
Server/Gateway/the gateway where the
subscriber
to
be
located/Subscriber/the subscriber to be
configured/Services/Call
According To Time Table] in the
navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
Set the begin time, end time and forward
number, and click <Ok>.
the
CFT
5-18
Remarks
Remarks
View/Location
configured
is
Forwarding
Required
Required
service
for
the
Advertisement
Table of Contents
