Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
5.14.2 Configuring Third Party Call Control Service
Table 5-21 Configure the third party call control service
Step
—
—
Return to
5.15 Callback-On–Busy Service
5.15.1 Introduction to Callback-On–Busy Service
When a subscriber using the callback-on-busy service fails to make a call because the
callee is busy, the XE IP PBX records the call request and then initiates the call again
after a certain interval.
A subscriber using the callback-on-busy service cannot register the do-not-disturb or
call forwarding services. Only one callee is supported by the callback-on-busy service.
Configuration
task
1)
2)
3)
To set the call time, you can
Add a third
Select [Absolute Time] and set the XE
party call
system date and system time in the [XE
control task
System Date] and [XE System Time] spin
boxes respectively.
Select [Relative Time] and set the time in
the [Minute] text box.
To batch add third party call control tasks,
click <Add> in the [Add List Item] dialog box
and add tasks as desired.
Command: participant (third party call
control service view)
Configure
other call
Refer to
services
XE IP PBX Configuration
Chapter 5 Call Service Configuration
Description
Select
[System
Server/Service/Third Party Control Call]
in the navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
Set values for the task ID, number 1,
number 2 and time, and then click <Ok>.
Call Service
Overview.
Overview.
5-27
Remarks
View/Location
Required
Optional
Advertisement
Table of Contents
