User Manual
H3C XE 200/2000 IP PBX G-Remote
Figure 3-3 Download progress dialog box
5)
Run the installation software after you download it.
Client" installation dialog box. Specify the destination folder where the GUI client
will be installed and then click <Install>. During the installation, a progress bar
appears at the bottom of the dialog box.
Figure 3-4 "XE-GUI Client" installation dialog box
After the installation, the [G-Remote] item appears in the [Start/Program/H3C] menu,
and a G-Remote shortcut is added to the desktop.
6)
Run the GUI client.
Three methods are available to start the GUI client:
Select [Start/Program/H3C/G-Remote].
Chapter 3 GUI Client Configuration
Figure 3-4
3-3
shows the "XE-GUI