Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
5.10.2 Configuring CFU Service
Table 5-12 Configure the CFU service
Step
1
2
—
—
Return to
Configuration
task
1)
Add one or
more forward
2)
numbers of the
CFU service
3)
To batch add forward numbers, click <Add>
in the [Add List Item] dialog box and add
numbers as desired.
Command: cfu-number (CFU view)
Select [System View/Location
Server/Gateway/the gateway where the
subscriber to be configured is
located/Subscriber/the subscriber to be
configured] in the navigation tree, and
Enable the
Select [Unconditional Call Forwarding] in
CFU service
the configuration window to enable the
for a
CFU service.
subscriber
Clear this check box to disable the CFU
service.
Command: srv-switch cfu (subscriber
number view)
1)
Delete one or
more forward
2)
numbers of the
CFU service
To batch delete forward numbers, select the
desired numbers while pressing and holding
<Ctrl>, and then click <Delete>.
Command: undo cfu-number (CFU view)
Configure
other call
Refer to
services
XE IP PBX Configuration
Chapter 5 Call Service Configuration
Description
Select
[System
Server/Gateway/the gateway where the
subscriber
to
be
located/Subscriber/the subscriber to be
configured/Services/Unconditional Call
Forwarding Table] in the navigation tree.
Click <Add> in the configuration window
to bring up the [Add List Item] dialog box.
Set the forward number and click <Ok>.
Select
[System
Server/Gateway/the gateway where the
subscriber
to
be
located/Subscriber/the subscriber to be
configured/Services/Unconditional Call
Forwarding Table] in the navigation tree.
Select the forward number to be deleted
in the configuration window and click
<Delete>.
Call Service
Overview.
Overview.
5-16
Remarks
View/Location
configured
is
Required
Required
View/Location
configured
is
Optional
Optional
Advertisement
Table of Contents
