Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Select a to-be-modified device from the device list on the [Login Management] page
and click <Modify> to bring up the [Device Add/Modify] page. You can modify the
device name, IP address, port number, and description of the GUI server.
II. Delete a target device
Select a target device from the device list on the [Login Management] page, and then
click <Delete>.
III. Log on to a device
Log on to a device as follows:
1)
Select the desired XE IP PBX from the device list on the [Login Management]
page.
2)
Type the account and password in the corresponding combo box and text box
respectively.
3)
Click <Login> to manage the device that you logs into.
If you have logged into multiple XE IP PBXs, you can switch between them through the
[View] menu.
Note:
The default account and password is XEAdmin and 88888888 respectively, and this
is a super administrator account. To ensure the network security, you need to
change the password in time after you log on to the device.
A normal user needs to get a username and password from the administrator before
logging onto the XE IP PBX with the self-service. A normal user's username is in the
format of "gateway name + - + short number excluding # + - + long number". For
example, for user 1001, which is under gateway gateway1 and whose short number
is #1, the username is gateway1-1-1001. The default login password of a normal
user is 1234.
On a PC through which an administrator has logged onto a GUI server, a normal
user cannot log on to the same GUI server. However, if a user has logged onto a
GUI server first, an administrator can log on to the same GUI server on the same
PC.
If the GUI connection breaks up, due to IP address change for example, and later
when you reconnect the GUI server, you need to restart GUI server through CLI or
wait for ten minutes before reconnecting.
Chapter 3 GUI Client Configuration
3-9
Advertisement
Table of Contents
