Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
III. Parameters configured by options
To assign a value to such a parameter, select one from the option list under the
parameter.
Figure 3-23 Select a value from the option list
IV. Read-only parameters
In the configuration window, read-only parameters provide you with the basic
configurations and status information of the device, as shown in
Figure 3-24 Read-only parameters
3.4.2 Restoring the Default Values
The GUI client allows you to restore the default settings. In the configuration window,
click <Default Value> to select the parameters to be restored in the [Default Value]
dialog box, and then click <Ok> to restore the default values of these parameters.
Chapter 3 GUI Client Configuration
3-13
Figure
3-24.
Advertisement
Table of Contents
