Table of Contents
Advertisement
■
The meters and display illuminate when
The engine switch is in IGNITION ON mode.
■
The brightness of the instrument panel lights
When the tail lights are turned on, the meter's brightness will be reduced
slightly unless the meter brightness level adjustment is set to the brightest
setting.
If the tail lights are turned on when the surroundings are dark, the meter's
brightness will reduce slightly. However, when the surroundings are bright,
such as during the daytime, the meter's brightness will not be reduced even if
the tail lights are turned on.
■
Customization
The meter display can be customized on the multi-information display.
(Customizable features: P. 594)
WARNING
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver's shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
LC200_OM_OM60T03U_(U)
2. Instrument cluster
99
2
Advertisement
Table of Contents
