Table of Contents
Advertisement
Electronic key battery
Replace the battery with a new one if it is depleted.
You will need the following items:
● Flathead screwdriver
● Small Phillips-head screwdriver
● Lithium battery (CR2032)
Replacing the battery
Take out the mechanical key.
1
Remove the cover.
2
To prevent damage to the key,
cover the tip of the screwdriver with
a rag.
Remove the depleted battery.
3
When removing the cover, if the
battery cannot be seen due to the
electronic key module attaching to
the upper cover, remove the elec-
tronic key module from the cover
so that the battery is visible as
shown in the illustration.
Insert a new battery with the "+"
terminal facing up.
LC200_OM_OM60T03U_(U)
6-3. Do-it-yourself maintenance
499
6
Advertisement
Table of Contents
