Table of Contents
Advertisement
■
Conditions affecting operation
P. 140
■
Note for the entry function
P. 141
■
If the engine does not start
●
The engine immobilizer system may not have been deactivated. (P. 85)
Contact your Toyota dealer.
●
Check that the shift lever is securely set in P. The engine may not start if the
shift lever is displaced out of P.
A message will be displayed on the multi-information display.
■
Steering lock
After turning the engine switch off and opening and closing the doors, the
steering wheel will be locked due to the steering lock function. Operating the
engine switch again automatically cancels the steering lock.
■
When the steering lock cannot be released
A message will be displayed on the multi-
information display.
Check that the shift lever is set in P. Press
the engine switch while turning the steer-
ing wheel left and right.
■
Steering lock motor overheating prevention
To prevent the steering lock motor from overheating, the motor may be sus-
pended if the engine is turned on and off repeatedly in a short period of time.
In this case, refrain from running the engine. After about 10 seconds, the
steering lock motor will resume functioning.
■
When "Smart Key System Malfunction See Owner's Manual" is dis-
played on the multi-information display
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer, immediately.
■
If the electronic key battery is depleted
P. 499
■
If the smart key system has been deactivated in a customized setting
P. 560
LC200_OM_OM60T03U_(U)
4-2. Driving procedures
215
4
Advertisement
Table of Contents
