202
4-1. Before driving
Positions for towing hitch receiver
Hitch receiver pin hole position:
1
45.3 in. (1151 mm)
Connecting trailer lights
Use the wire harness stored in the
rear end under the vehicle body.
Please consult your dealer when
installing trailer lights, as incorrect
installation may cause damage to
the vehicle's lights. Please take
care to comply with your state's
laws when installing trailer lights.
■
Service connector for towing brake controller
Your vehicle is equipped with a service connector for the trailer brake control-
ler. Please consult your dealer when installing trailer brake systems to the
vehicle.
LC200_OM_OM60T03U_(U)