Table of Contents
Advertisement
290
4-5. Using the driving support systems
Adjusting the set speed
To change the set speed, operate the lever until the desired set speed
is obtained.
Increases the speed
1
Decreases the speed
2
Fine
adjustment:
move the lever in the desired direc-
tion.
Large adjustment: Hold the lever in
the desired direction.
The set speed will be increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
the lever is operated.
Large adjustment: The set speed can be increased or decreased continu-
ally until the lever is released.
*
1
: When the set speed is shown in "MPH"
*
2
: When the set speed is shown in "km/h"
Canceling and resuming the constant speed control
Pulling the lever toward you
1
cancels the constant speed
control.
The speed setting is also canceled
when the brakes are applied.
Pushing the lever up resumes
2
the constant speed control.
Resuming is available when the
vehicle speed is more than approx-
imately 25 mph (40 km/h).
■
Cruise control can be set when
●
The shift lever is in the D or range 4 or higher of S has been selected.
●
Vehicle speed is above approximately 25 mph (40 km/h).
■
Accelerating after setting the vehicle speed
●
The vehicle can be accelerated normally. After acceleration, the set speed
resumes.
●
Even without canceling the cruise control, the set speed can be increased
by first accelerating the vehicle to the desired speed and then pushing the
lever down to set the new speed.
LC200_OM_OM60T03U_(U)
Momentarily
*
1
or 1 km/h (0.6 mph)
*
2
each time
Advertisement
Table of Contents
